icon
Derma Rescue LED Light Therapy & Facial Toning System
LED Light Therapy in Red and Blue Photon
  • Load image into Gallery viewer, Derma Rescue LED Light Therapy & Facial Toning System
  • Load image into Gallery viewer, LED Light Therapy in Red and Blue Photon
little green leaf

Derma Rescue LED Light Therapy & Facial Toning System

Lift your face with non-invasive, non-surgical wave technology. In addition, anti-aging phototherapy rejuvenates mature skin.
Red light therapy for anti-aging, skin-clearing. Blue light therapy for acne, Microcurrent, galvanic waves for firming and energizing. Derma rescues your way to radiant skin today.
Price:
Regular price
$129.95
Sale price
$129.95
Regular price
$295.00
Sold out
Unit price
per 
Manufacturer: Derma Rescue

Product Description

Product Description

Derma Rescue LED Light Therapy & Facial Toning System

Red Light Therapy for Anti-aging - Blue Light for acne - Microcurrent & Galvanic Waves for facial tightening

The At-Home Non-Surgical Facelift Alternative PLUS Red & Blue Light Therapy

LED Light Therapy plus Microcurrent

Are you ready to love your skin again? Leading dermatologists have been using LED light therapy in their practices for years. Now you can use the same cutting-edge technology in the comfort of your own home. No more time-consuming and costly trips to the spa! Our Derma Rescue costs less than just one treatment at a med spa!

Derma Rescue is an innovative 3-in-1 facial toning system with LED Light therapy plus Microcurrent. It is incredibly effective in improving the skin's Elasticity by retraining facial muscles; your face will visibly look and feel firmer.

You will love the collagen-building benefits of plumper skin with red light therapy.

If you struggle with adult acne or suffer from hormonal breakouts, then the Blue light therapy is for you! In clinical tests, the blue interchangeable head improves skin clarity by destroying the p. Acnes bacteria. And if that's not enough, tell gravity to take a hike with our Microcurrent and return your skin's firmness to its original place.

Gentle waves penetrate your facial features, improving Elasticity, bringing energy and life back to sagging areas. Lift your cheeks, jowls, and droopy regions today. Derma, Rescue your way to the radiant skin. Lift, Clarify, and Sculpt with cutting-edge LED Light Therapy, Microcurrent, and Galvanic Wave technology.

Three interchangeable treatment panels rescue your skin from the effects of aging. Don't miss this exceptional opportunity to own your own Derma Rescue LED light therapy plus Microcurrent. It is available at an incredible price for a limited time only!

Benefits:
  • Anti-Aging
  • Collagen Boosting
  • Acne Clearing
  • Facial Toning
  • Firming
  • Non-invasive
  • Non-surgical
  • Injection-free
  • No Downtime
  • No Side Effects

microcurrent facial lift

Our Titanium Treatment Panel uses low-level Galvanic Microcurrent Waves for a safe, non-surgical facelift alternative.

• Skin Tightener
• Improve Elasticity
• Increase in ATP Production
• Encourage Circulation
• Revive Tired Skin
• Galvanic Waves

Clarify with Blue LED Light Treatment

Our Blue LED Light Treatment Panel is exceptionally useful in destroying the acne bacteria, leading to breakouts. In addition, blue Light Therapy is a natural solution that improves skin clarity without the harsh topical treatments that can lead to irritation.

• Reduce Blemishes
• Minimize Pores
• Control Oil
• Help prevent future breakouts
• Clearer Skin

Anti-Aging Red LED Light Therapy

Powerful, energizing Red Light Therapy for a fantastic anti-aging collagen-booster, plumping and re-contouring your facial features. Now you can use the same cutting-edge technology used by leading dermatologists in medispas right in the convenience of your own home. Experience the benefits of a radiant complexion today!

• Diminish Wrinkles
• Increase Collagen Production
• Rejuvenate Skin Tone
• Reduce Redness



Galvanic Technology - The Power of Ions

Transmit ongoing positive or negative ions to achieve transdermal delivery of the substance. Use the Galvanic Ions with a cleanser to remove impurities from the skin, or use serums to import nutrients and active ingredients.

Microcurrent - Your At-Home Mini Facial

Deliver a steady current of positive and negative ions to firm skin and promote cellular turnover and skin revitalization. Low-level Microcurrent stimulates and improves blood circulation. In addition, Microcurrent naturally tightens the skin for facial toning, encouraging healthy and youthful-looking skin.

Microcurrent is a safe low-level current below 36V, yet it is strong enough to deliver remarkable and rapid results. Our Lift Treatment Head is hypoallergenic and 99.5% Titanium.

Blue LED Light Therapy - Healthy Skin

P. Acne is a common type of acne caused by bacteria and can be significantly improved using the LED blue Light. Clinical studies have shown that a specific LED blue light wavelength causes the P. Acnes bacteria to self-destruct and allows the acne to heal naturally.

LED blue Light can improve and reduce acne lesions by 59-67%. 80% of participants respond to blue lights. There is no adverse effect or downtime. Even those with sensitive skin can benefit from light therapy. The blue Light emits non-UV wavelengths of 405-420 for rapid improvement.

Red Light Therapy - Beautiful Skin

LED Lights or photo facials have been used extensively by dermatologists. LED is painless and a non-invasive skin rejuvenation treatment. Numerous studies have shown that when the skin is exposed to the red LED light therapy. The light energy triggers collagen synthesis. As a result, LEDs can improve a reduction in the signs of aging by 25 to 50%. In addition, 81% of the subjects reported a noticeable improvement in facial wrinkles.

LED helps skin cells regenerate 150 to 200 times faster, so your skin acts more youthful. The photo facial LED red light therapy emits visible wavelengths of 630-660 nm. With just 3 minutes of photo facial each day, the skin improves as new collagen appears, blotchiness disappears, and pores get minimized. Derma Rescue your way for radiant skin.

How to use

Galvanic Ion Treatment & Microcurrent

During the first month of use, daily treatments are recommended. After the 1st month, treatments are only needed 1 to 2 times a week.

You do not need to perform all treatments at once. For example, you may use galvanic or Microcurrent or light therapy. However, if you use a combination of ion and light therapy, do the galvanic ion treatments first, then Microcurrent, LED.

To get started, press and hold on to the button until you hear a beep. The beep may take up to 60 seconds to sound. When the product is on, it is in standby mode. You will need to press the treatment button desired and held it to face to begin treatment.

If left unused, the device will automatically turn off after 4 minutes. Next, you must place the device on the face and place your thumb on the silver oval for the Microcurrent to begin. Then, for LED, put the device to your face for the Light to turn on.

STEP 1 - Cleanse
1. Install the Titanium Treatment Head.
2. Remove makeup and apply a water-based cleansing gel to the face.
3. Turn on the device by pressing the Power Button for 2 seconds until it beeps.
4. Press Ion Treatment Button so that the CLEANSE light is on.
5. Apply the Treatment Head to the face and move over the entire face, with the Light rotating and lifting motions. Avoid the eye area.
6. After 4 minutes, the device automatically turns off with a short beep sound.
7. Rinse off cleansing gel with water. Do not dry and proceed to Step 2.

STEP 2 - Nourish
Apply a thick layer of skincare serum, hydration gel, or moisturizer to the face.
1. Press Ion Treatment Button twice until the NOURISH light is on.
2. Apply the Treatment Head to the face and move over the entire face with gentle rotating and lifting motions. Avoid the eye area.
3. After 4 minutes, the device automatically turns off with a beep.
4. Do not dry and proceed to Step 3.
 

BLUE LIGHT THERAPY - CLARIFY

Complete the Microcurrent before using BLUE Light. You may skip the Blue light therapy if you do not have blemishes. Only use blue Light on a clean, dry face.
Use Blue Light Therapy daily.
1. Install Blue Treatment Head.
2. Turn on the device by pressing the Power Button for 2 seconds until it beeps.
3. Press LED Button.
4. Separate your face into six sections, as shown in the picture. Then, apply the Treatment Head to one part of the face. The Blue Light will appear only when in contact with skin.
5. Remain on this spot for 3 minutes. A short beep will sound when finished.
6. After treating one place, move to another area on the face and repeat steps #4 and #5 until the entire face is complete. The whole treatment takes 18 minutes.
 

RED LIGHT THERAPY - SCULPT

Complete the Microcurrent or Blue light therapy before using RED Light therapy. Then, use the Red Light Therapy daily on a clean, dry face only. 
1. Install Red Treatment Head.
2. Turn on the device by pressing the Power Button for 2 seconds until it beeps.
3. Press LED Button.
4. Separate your face into six sections, as shown in the picture. Then, apply Treatment Head to one spot on the face. The Red Light will appear only when in contact with skin.
5. Remain on this spot for 3 minutes. A short beep will sound when finished.
6. After treating one place, move to another area on the face and repeat steps #4 and #5 until the entire face is completed. The whole treatment takes 18 minutes to complete.

STEP 3 - Microcurrent - LIFT
1. Press Ion Treatment Button 3 times until the Lift light is on.
2. Apply the Treatment Head to the face and move over the entire face with rotating and lifting motions. Avoid the eye area. Some might feel a tingly sensation; others may not. Tingling or feeling no sensation is normal.
3. After 4 minutes, the device automatically turns off with a beep
4. Proceed to LED Light Therapy if desired.

How To Change Treatment Heads
1. Pull the treatment head release lever at the back of the device and slide out the existing Treatment Head upwards.
2. Slide in your desired Treatment head into the slot until it is installed securely with a clicking sound.

CARE AND MAINTENANCE
Wipe the device with a clean, moist towel after each use.
Do not wash the device directly with water or any other cleaning agent. Always keep your body dry and clean.
Store the device and charging unit in a cool, dry place.

CHARGING AND MAINTENANCE - How To Charge Your Device

  • The Power indicator red light stays lit while charging.
  • The Power indicator red light blinks twice when the battery runs out and turns off when the battery is fully charged.
  • Place the device on the charging stand and connect the adaptor to the DC input at the back of the stand.
  • Plug the adaptor into the electrical outlet. The whole charging process usually takes 3 hours.
Ingredients

The Derma Rescue LED Light Therapy & Facial Toning System Includes:

  • Hand-Held Device with 3 Interchangeable Treatment Panels
  • One Titanium Panel for Microcurrent & Galvanic Wave Treatments
  • One Blue LED Light Treatment Panel
  • One Red LED Light Treatment Panel
  • Base Charger with 100-240V Universal Power Supply Adapter


IMPORTANT

The battery comes with an adequate amount of power upon production so that you may use the device immediately after purchase. Only charge the device when the battery runs out (Power indicator red light starts blinking).

Avoid charging the device without exhausting the battery; always charge after the battery runs out.

The power sensor is a sensitive component that turns on/off the charging function based on the slightest increase or decrease of power stored within the battery after its fully charged. This may cause the power indicator red light to turn on or off at a different charging incident. This is a standard operation of the device and should not be considered a system defect. This will not happen if the device is charged only after the battery is fully depleted.

SAFETY PRECAUTIONS

Read all instructions before using this device.

  1. The device should be operated, transported, and stored in the manner specified in this manual.
  2. Do not disassemble, rebuild, or repair the device yourself.
  3. Do not use the device if it has a damaged cord or plug.
  4. Only use the charger stand and adaptor to charge the device.
  5. Always attach the adaptor to the charger stand first before inserting it into the outlet.
  6. Do not scratch, mark or damage the Treatment Head surface,
  7. Always unplug the adaptor once charging is finished.
  8. Keep adaptor and charger away from water.
  9. Keep the device away from flammable aerosol products or where oxygen is being administered.
  10. If the device, charger stand, or adaptor begins to overheat, turn it off immediately.
  11. Failure to end and maintain the device following the instructions outlined in the manual will invalidate the warranty.

MEDICAL PRECAUTION

If you experience any adverse effects, stop use immediately, and contact your doctor.

  • Do not use it on skin that is infected, burned, or cut.
  • Do not use if you have wound, eczema, or tumors.
  • Do not use it on infants.
  • The device is not intended for persons (including children) with reduced physical, sensory, or mental capabilities.
  • Do not use on eyelids and mucous membranes, e.g., inside of the mouth.
  • If you are pregnant, consult a doctor before use.
  • Use gently on your face, do not rub or move vigorously during treatments.
  • Do not use if you have photosensitive skin reactions.
  • Do not look directly into LED lights when they are lit.
  • Do not shine the light source into someone else's eyes.


Troubleshooting Guide

Follow these simple steps to ensure you start the handheld device correctly! If you have any questions on how to get it started, watch our video or call us and one of our customer service representatives can help.

1. To turn on the handheld device, press the button until you hear it beep. It may take 60 seconds or longer.
2. It's okay that the red light turns off when in the charging base, which means it is fully charged.
3. The handheld treatment heads must be touching your face to turn on. Plus, make sure you are touching the oval on the back of the device with your finger, thumb, or part of your hand, whatever is the most comfortable for you. For the LED lights to work, make sure that the photo facial button is pressed after the device is turned on.
4. Make sure the plastic cover on the titanium treatment head is removed before using the Microcurrent.

How to use

Galvanic Ion Treatment & Microcurrent

During the first month of use, daily treatments are recommended. After the 1st month, treatments are only needed 1 to 2 times a week.

You do not need to perform all treatments at once. For example, you may use galvanic or Microcurrent or light therapy. However, if you use a combination of ion and light therapy, do the galvanic ion treatments first, then Microcurrent, LED.

To get started, press and hold on to the button until you hear a beep. The beep may take up to 60 seconds to sound. When the product is turned on, it is in standby mode. You will need to press the treatment button desired and held it to face to begin treatment.

If left unused, the device will automatically turn off after 4 minutes. Next, you must place the device on the face and place your thumb on the silver oval for the Microcurrent to begin. Then, for LED, put the device to your face for the Light to turn on.

STEP 1 - Cleanse
1. Install the Titanium Treatment Head.
2. Remove makeup and apply a water-based cleansing gel to the face.
3. Turn on the device by pressing the Power Button for 2 seconds until it beeps.
4. Press Ion Treatment Button so that the CLEANSE light is on.
5. Apply the Treatment Head to the face and move over the entire face, with the Light rotating and lifting motions. Avoid the eye area.
6. After 4 minutes, the device automatically turns off with a short beep sound.
7. Rinse off cleansing gel with water. Do not dry and proceed to Step 2.

STEP 2 - Nourish
Apply a thick layer of skincare serum, hydration gel, or moisturizer to the face.
1. Press Ion Treatment Button twice until the NOURISH light is on.
2. Apply the Treatment Head to the face and move over the entire face with gentle rotating and lifting motions. Avoid the eye area.
3. After 4 minutes, the device automatically turns off with a beep.
4. Do not dry and proceed to Step 3.
 

BLUE LIGHT THERAPY - CLARIFY

Complete the Microcurrent before using BLUE Light. You may skip the Blue light therapy if you do not have blemishes. Only use blue Light on a clean, dry face.
Use Blue Light Therapy daily.
1. Install Blue Treatment Head.
2. Turn on the device by pressing the Power Button for 2 seconds until it beeps.
3. Press LED Button.
4. Separate your face into six sections, as shown in the picture. Then, apply the Treatment Head to one part of the face. The Blue Light will appear only when in contact with skin.
5. Remain on this spot for 3 minutes. A short beep will sound when finished.
6. After treating one place, move to another area on the face and repeat steps #4 and #5 until the entire face is finished. The whole treatment takes 18 minutes.
 

RED LIGHT THERAPY - SCULPT

Complete Microcurrent or Blue light therapy before using RED Light therapy. Use on a clean, dry face only. Use Red Light Therapy daily.
1. Install Red Treatment Head.
2. Turn on the device by pressing the Power Button for 2 seconds until it beeps.
3. Press LED Button.
4. Separate your face into six sections, as shown in the picture. Then, apply Treatment Head to one spot on the face. The Red Light will appear only when in contact with skin.
5. Remain on this spot for 3 minutes. A short beep will sound when finished.
6. After treating one place, move to another area on the face and repeat steps #4 and #5 until the entire face is finished. The whole treatment takes 18 minutes to complete.

STEP 3 - Microcurrent - LIFT
1. Press Ion Treatment Button 3 times until the Lift light is on.
2. Apply the Treatment Head to the face and move over the entire face with rotating and lifting motions. Avoid the eye area. Some might feel a tingly sensation. Tingling is normal.
3. After 4 minutes, the device automatically turns off with a beep
4. Proceed to LED Light Therapy if desired.

How To Change Treatment Heads
1. Pull the treatment head release lever at the back of the device and slide out the existing Treatment Head upwards.
2. Slide in your desired Treatment head into the slot until it is installed securely with a clicking sound.

CARE AND MAINTENANCE
Wipe the device with a clean, moist towel after each use.
Do not wash the device directly with water or any other cleaning agent. Always keep your body dry and clean.
Store the device and charging unit in a cool, dry place.

CHARGING AND MAINTENANCE - How To Charge Your Device

  • The Power indicator red light stays lit while charging.
  • The Power indicator red light blinks twice when the battery runs out and turns off when the battery is fully charged.
  • Place the device on the charging stand and connect the adaptor to the DC input at the back of the stand.
  • Plug the adaptor into the electrical outlet. The whole charging process usually takes 3 hours.
Ingredients

The Derma Rescue LED Light Therapy & Facial Toning System Includes:

  • Hand-Held Device with 3 Interchangeable Treatment Panels
  • One Titanium Panel for Microcurrent & Galvanic Wave Treatments
  • One Blue LED Light Treatment Panel
  • One Red LED Light Treatment Panel
  • Base Charger with 100-240V Universal Power Supply Adapter


IMPORTANT

The battery comes with an adequate amount of power upon production so that you may use the device immediately after purchase. Only charge the device when the battery runs out (Power indicator red light starts blinking).

Avoid charging the device without exhausting the battery; always charge after the battery runs out.

The power sensor is a sensitive component that turns on/off the charging function based on the slightest increase or decrease of power stored within the battery after its fully charged.

This may cause the power indicator red light to turn on or off at a different charging incident. However, this is a standard operation of the device and should not be considered a system defect.

This will not happen if the device is charged only after the battery is fully depleted.

SAFETY PRECAUTIONS

Read all instructions before using this device.

  1. The device should be operated, transported, and stored in the manner specified in this manual.
  2. Do not disassemble, rebuild, or repair the device yourself.
  3. Do not use the device if it has a damaged cord or plug.
  4. Only use the charger stand and adaptor to charge the device.
  5. Always attach the adaptor to the charger stand first before inserting it into the outlet.
  6. Do not scratch, mark or damage the Treatment Head surface,
  7. Always unplug the adaptor once charging is finished.
  8. Keep adaptor and charger away from water.
  9. Keep the device away from flammable aerosol products or where oxygen is being administered.
  10. If the device, charger stand, or adaptor begins to overheat, turn it off immediately.
  11. Failure to end and maintain the device following the instructions outlined in the manual will invalidate the warranty.

MEDICAL PRECAUTION

If you experience any adverse effects, stop use immediately, and contact your doctor.

  • Do not use it on skin that is infected, burned, or cut.
  • Do not use if you have any wounds, eczema, or tumors.
  • Do not use it on infants.
  • The device is not intended for persons (including children) with reduced physical, sensory, or mental capabilities.
  • Do not use on eyelids and mucous membranes, e.g., inside of the mouth.
  • If you are pregnant, consult a doctor before use.
  • Use gently on your face, do not rub or move vigorously during treatments.
  • Do not use if you have photosensitive skin reactions.
  • Do not look directly into LED lights when they are lit.
  • Do not shine the light source into someone else's eyes.


Troubleshooting Guide

Follow these simple steps to ensure you start the handheld device correctly! If you have any questions on how to get it started, watch our video or call us and one of our customer service representatives can help.

1. To turn on the handheld device, press the button until you hear it beep. It may take 60 seconds or longer.
2. It's okay that the red Light turns off when in the charging base, which means it is fully charged.
3. The handheld treatment heads must be touching your face to turn on. Plus, make sure you are touching the oval on the back of the device with your finger, thumb, or part of your hand, whatever is the most comfortable for you. For the LED lights to work, make sure that the photo facial button is pressed after the device is turned on.
4. Make sure the plastic cover on the titanium treatment head is removed before using the Microcurrent.

The Derma Rescue LED Light Therapy & Facial Toning System Includes:
<

Customer Reviews

Based on 2 reviews Write a review

QUESTIONS & ANSWERS

Ask a Question
  • Can you use microcurrent around your eyes?

    Yes, you can use the microcurrent setting around the eyes. Make sure that you are below the eye, then up and around the brow bone. You never want to go directly over the eye or lid with any of the treatment heads.

  • Will red light therapy make dark even skin darker?

    Light therapy helps reduce discolorations and fades age spots. It doesn't make dark skin darker.

  • Is this all in one unit...can you use around eyes,?

    It is not recommended to use LED Light around the eyes.