Derma Rescue LED Microcurrent

Derma Rescue is a 3-in-1 at-home facial toning system that combines LED light therapy, galvanic microcurrent waves, and a titanium treatment panel for the look of lifted, clearer, firmer skin. The system delivers red and blue LED light and low-level microcurrent at home, for a more elastic, clearer-looking complexion with no downtime.

If you want clearer-looking skin or a firmer, more lifted look, this device brings three modes together: a blue light mode (405-420 nm) for the look of clearer, more balanced-looking skin, a red light mode (630-660 nm) for the look of firmer, smoother skin, and microcurrent for a toned, lifted-looking appearance. Use the interchangeable heads for targeted sessions instead of multiple separate devices.

• Blue light mode (405-420 nm) for the look of clearer, more balanced-looking skin
• Red light mode (630-660 nm) for the look of firmer, smoother skin
• The titanium treatment head is hypoallergenic and 99.5% titanium, providing a low-level galvanic microcurrent of under 36 V for noninvasive facial toning.
• Includes three interchangeable panels plus a base charger with a 100-240V universal adapter for global use
• Typical full charge time is about 3 hours; the power indicator shows charging and low-battery status

Unlike single-modality home tools or costly in-office sessions, this system combines red and blue LED light modes with microcurrent and galvanic modes in one handheld unit for convenient daily use. Follow the safety precautions and the included manual; remove the protective cover from the titanium head before using microcurrent.

Refer to the user manual and safety guidelines for contraindications and consult your clinician for medical concerns.

What is the difference between red light therapy and blue light therapy?
Red light mode is best for the look of firmer, smoother, plumper-looking skin and a more contoured look. Blue light mode is best for the look of clearer, more balanced-looking skin.

During the first month of use, daily treatments are recommended. After the 1st month, treatments are only needed 1 to 2 times a week.

You do not need to perform all treatments at once. For example, you may use galvanic, microcurrent, or light therapy. However, if you use a combination of ion and light therapy, do the galvanic ion treatments first, then microcurrent, and end with LED.

Place the device on the charging dock and charge for about 3 hours. When the device is fully charged, press and hold on to the button until you hear a beep to get started. It may take up to 60 seconds for the beep to sound.

When the product is on, it is in standby mode. You will need to press the treatment button desired and hold it to the face to begin treatment.

If you are using the titanium treatment head for microcurrent, you will need to place your thumb or finger on the silver oval and place it on your face for the treatment to begin.

For LED, put the device to your face for the light to turn on.

If left unused, the device will automatically turn off after 4 minutes.

STEP 1 - Cleanse

Install the Titanium Treatment Head.
Remove makeup and apply a water-based cleansing gel to the face.
Turn on the device by pressing the Power Button for 2 seconds until it beeps.
Press Ion Treatment Button so that the CLEANSE light is on.
Apply the Treatment Head to the face and move over the entire face with the light rotating and lifting motions. Avoid the eye area.
After 4 minutes, the device automatically turns off with a short beep sound.
Rinse off the cleansing gel with water. Do not dry and proceed to Step 2.

STEP 2 - Nourish
Apply a thick layer of skincare serum, hydration gel, or moisturizer to the face.

Press Ion Treatment Button twice until the NOURISH light is on.
Apply the Treatment Head to the face and move over the entire face with gentle rotating and lifting motions. Avoid the eye area.
After 4 minutes, the device automatically turns off with a beep.
Do not dry and proceed to Step 3.

BLUE LIGHT THERAPY - CLARIFY
Complete the Microcurrent before using BLUE Light. You may skip the Blue light therapy if you do not have blemishes. Only use blue light on a clean, dry face.
Use Blue Light Therapy daily.

Install Blue Treatment Head.
Turn on the device by pressing the Power Button for 2 seconds until it beeps.
Press LED Button.
Separate your face into six sections, as shown in the picture. Then, apply the Treatment Head to one part of the face. The Blue Light will appear only when in contact with skin.
Remain on this spot for 3 minutes. A short beep will sound when finished.
After treating one place, move to another area on the face and repeat steps #4 and #5 until the entire face is finished. The whole treatment takes 18 minutes.
RED LIGHT THERAPY - SCULPT
Complete the Microcurrent or Blue light therapy before using RED Light therapy. Use on a clean, dry face only. Use Red Light Therapy daily.

Install Red Treatment Head.
Turn on the device by pressing the Power Button for 2 seconds until it beeps.
Press LED Button.
Separate your face into six sections, as shown in the picture. Then, apply the Treatment Head to one spot on the face. The Red Light will appear only when in contact with skin.
Remain on this spot for 3 minutes. A short beep will sound when finished.
After treating one place, move to another area on the face and repeat steps #4 and #5 until the entire face is finished. The whole treatment takes 18 minutes to complete.
STEP 3 - Microcurrent - LIFT

Press Ion Treatment Button 3 times until the Lift light is on.
Apply the Treatment Head to the face and move over the entire face with rotating and lifting motions. Avoid the eye area. Some might feel a tingly sensation. Tingling is normal.
After 4 minutes, the device automatically turns off with a beep
Proceed to LED Light Therapy if desired.
How To Change Treatment Heads

Pull the treatment head release lever at the back of the device and slide out the existing Treatment Head upwards.
Slide your desired Treatment head into the slot until it is installed securely with a clicking sound.

Derma Rescue

820103601603

These statements have not been evaluated by the FDA. This product is not intended to diagnose, treat, cure, or prevent any disease.

Intro music

Slide 1:
Derma Rescue LED Light Theapy & Facial Toning System

Slide 2:
Video of what it does.
Red light therapy for anti-aging, and skin-clearing. Blue light therapy for acne, Microcrrent, galvanic waves for firming and energizing. Derma rescues your way to radiant skin today.

Slide 3:
Benefits of At-Home Microcurrent -
Anti-Aging
Collagen Boosting
Acne Clearing
Facial Toning
Firming
Non-invasive
Non-surgical
Injection-free
No Downtime
No Side Effects
No Expensive Trips to the Dermatologist

Slide 4:
Skin Perfection Logo

Outro music