Sale
Leucidal Complete
Accepted on the Whole Foods Premium Preservative List
Leucidal® Complete is the first all-natural broad-spectrum antimicrobial to keep your formulations free of bacteria, yeast, fungi, and mold.
Leucidal® Complete is an all-natural, broad-spectrum antimicrobial preservative used at 2 to 4% to protect water-based and oil-based formulas against bacteria, yeast, and mold. It is the natural alternative to synthetic preservatives.
Available in three sizes: a 0.5 oz glass dropper bottle, a 4 oz mini jug, or a 16 oz white jug.
What it is
INCI: Leuconostoc/Radish Root Ferment Filtrate, Lactobacillus, Cocos Nucifera (Coconut) Fruit Extract
Leucidal® Complete is the first preservative of its kind to provide broad-spectrum protection from antimicrobial peptide fermentation. It combines two ferments.
- Leucidal® Liquid — a ferment of lactic acid bacteria (Leuconostoc kimchii)
- A coconut ferment — Cocos nucifera fermented with Lactobacillus
The two work in tandem to give exceptional protection against bacteria, yeast, and mold, with no synthetic ingredients.
It can be added to your formulations at room temperature. If you have used Leucidal® Liquid, you will love the Complete version.
How much to add
Recommended usage rate is 2 to 4%. Using our house rate of 9 drops per 1% per fluid ounce:
| Concentration | Into 1 oz | Into 2 oz |
|---|---|---|
| 2% | 18 drops · 0.6 g | 36 drops · 1.2 g |
| 4% | 36 drops · 1.2 g | 72 drops · 2.4 g |
Full conversions on the serum booster chart.
How far each size goes
| Size | Batch at 2% | Batch at 4% |
|---|---|---|
| 0.5 oz dropper | about 25 oz | about 12.5 oz (375 ml) |
| 4 oz mini jug | about 200 oz | about 100 oz |
| 16 oz white jug | about 800 oz | about 400 oz |
How to use it
- Add 2 to 4% Leucidal® Complete to your DIY cosmetic or skincare formula.
- Blend until thoroughly mixed.
- Leucidal® Complete may be hazy. To reduce haze, warm it to 95–104°F and add it while it is still fully liquid.
- Store the finished product in a cool, dry place.
Want to add it to a skincare product you already own? Follow our directions for adding a serum booster. It is the same simple process.
Making from scratch? Our DIY formulas for anti-aging oils, serums, scrubs and more all take Leucidal® Complete to keep them fresh and free of bacteria, yeast, and mold.
Which Leucidal is right for you
- Leucidal® Complete — broad-spectrum, water- and oil-based formulas, bacteria, yeast and mold
- Leucidal® Liquid — the original radish root ferment; try it for oil-based formulas
- Leucidal® Max Lactobacillus Ferment — another all-natural preservative alternative
A note on testing
Leucidal® Complete protects against bacteria, yeast, and mold; however, any formula you plan to sell should undergo challenge testing by a lab.
Storage
Store in a cool, dry place.
For external use only. Cosmetic grade. Leucidal® is a trademark of Active Micro Technologies.
EWG Score
-
Leuconostoc/Radish Root Ferment Filtrate Origin:
-
Lactobacillus Origin:
-
Cocos Nucifera (Coconut) Fruit Extract Origin:
INGREDIENTS MATTER.
Customer Reviews
Questions & Answers
Leucidal Complete is a combination of Radish Root ferment, Lactobacillus, and Coconut for the strongest natural protection.
For a 2% concentration in a 1 ounce serum base, you would add 18 drops.
For a 4% concentration in a 1 ounce serum base you would add 36 drops.
Typically no, but it does depend on the recipe and presrvation system.
When Leucidal Complete gets cold it can crystallize or become solid. This is prevalent in the fall and winter months due to cooler temperatures.
It should be added to your formulation at 95 -104 degrees. You should not use the product in your formulation unless it is a complete liquid.
To heat up and liquefy Leucidal Complete, use a double boiler or microwave at 30 seconds to 1-minute intervals, we have found that 2-3 minutes is all that is needed.
If you are using the smaller, .5 ounce glass bottle, you can simply run it under hot water until liquid.
Leucidal Liquid is the easiest product to use in terms of creating clear toners. However, remember that all Leucidal products can be potentially incompatible with highly anionic ingredients (some thickeners). Therefore, monitor and test all components for compatibility in your formula- not just one ingredient.
Always test the compatibility of your ingredients before making an entire batch! We suggest using a small amount of Rose Water and adding the Leucidal Liquid to the formula at a .5% concentration. Monitor the recipe; if it stays clear, continue adding small amounts until you reach the desired concentration.
If the recipe is cloudy or you see haziness, consider using a solubilizing agent to improve clarity.
We would also recommend using Leucidal Liquid with an additional preservative to protect your water-based formula fully.
Never freeze Leucidal Complete or any Leucidal product.