About Skin Perfection

We’re here to help you create clean beauty products and get you looking younger. We’ve put together our best tips for making your own skincare products and finding the best anti-aging ingredients, plus in-depth videos and guides.

Learn more about our team here.

Getting Started and Guides

Make sure to start with the right setup. Learn how to create your DIY skincare the right way. It'll make your life so much easier. Here's how:

The Best Peptides

We've used all of the best peptides out there. Some of them we love. Others we didn't. Learn from our experience on which anti-aging peptides work.

Best-Selling Skincare

Need a ready-made solution? Check out our best-selling anti-aging products, including serums and moisturizers. We've got you.

Your Guide to Beta-Glucan for Skin Hydration

Your Guide to Beta-Glucan for Skin Hydration

This is a formulating page for people who make their own skincare: how much beta-glucan to use, which form to buy, where it goes in a formula, and three complete recipes with grams. If you want the background on what beta-glucan is and how it feels on skin, start with our Beta-Glucan for Skin guide to soothing hydration. Here we go straight to the bench.

Know Which Beta-Glucan You Are Buying

Beta-glucan is a polysaccharide found in oats, yeast and some mushrooms. For DIY formulators it is usually sold in one of two forms, and the usage rate depends entirely on which one you have.

Form What it is How the rate is stated
Liquid solution Beta-glucan already dissolved in water, often with glycerin. Example INCI: water, glycerin, beta glucan. As a percentage of the solution you add
Powder Dry, concentrated beta-glucan that you dissolve yourself As a percentage of dry powder, which is far more concentrated

Never swap a liquid rate for a powder rate. The recipes on this page use the liquid solution form, because it is the easiest to dissolve evenly at home and its supplier usage rate is published.

Usage Rate: Use the Supplier's Maximum

For the liquid form used here, the supplier specification sheet (a supplier Beta Glucan, INCI water, glycerin, beta glucan) lists a typical concentration of 1% to 5% and says to add it to the water phase. I formulate at the top of that range, 5%, in every recipe below.

Batch size Beta-glucan solution at 5%
30 g (about 1 fl oz) 1.5 g
60 g (about 2 fl oz) 3.0 g
100 g 5.0 g
250 g 12.5 g

If you buy a different beta-glucan product, read its own technical sheet and use that supplier's maximum, because concentrations differ between products. If your product does not list a rate, ask the supplier before formulating.

What the research tested

The best-known study on topical oat beta-glucan is by Pillai, Redmond and Roding (2005). In a penetration test, a 0.5% beta-glucan solution was applied to human abdominal skin at 5 mg per square centimeter, and the authors reported that beta-glucan penetrated into the epidermis and dermis despite its large molecular size. In a separate clinical study of 27 participants over 8 weeks, digital analysis of silicone skin replicas measured a significant reduction in wrinkle depth, wrinkle height and overall roughness. The published abstract does not state the concentration used in that clinical study, so I do not use it to set a usage rate.

Formulating Rules for Beta-Glucan

  • Phase: water phase only. Beta-glucan solution will not mix into oils.
  • Temperature: the supplier sheet gives storage guidance but no heat-stability limit. Because I cannot confirm heat stability, I add it below 40°C in emulsions.
  • Texture: at 5% it adds slip and a soft, slightly cushioned finish. If a serum feels tacky, reduce the glycerin, not the beta-glucan.
  • pH: the finished recipes below target pH 5.0 to 5.5, which suits the gluconolactone and sodium benzoate preservative used.
  • Preservation: beta-glucan is a sugar-based polymer in water, which microbes can feed on. Every recipe below includes a broad-spectrum preservative.

Recipe 1: Beta-Glucan Hydrating Gel Serum (100 g)

Ingredient % Grams Function
Distilled water 89.7 89.7 Solvent
Beta-glucan solution 5.0 5.0 Hydration, soft finish
Vegetable glycerin 3.0 3.0 Humectant
Xanthan gum 0.3 0.3 Light gel body
Gluconolactone and sodium benzoate 2.0 2.0 Preservative
Total 100.0 100.0
  1. Sanitize all tools and the bottle with 70% isopropyl alcohol and let them dry.
  2. Disperse the xanthan gum in the glycerin to make a smooth slurry.
  3. Add the distilled water and stir or whisk until the gel is smooth and free of lumps, about 5 minutes.
  4. Add the beta-glucan solution and stir until uniform.
  5. Add the gluconolactone and sodium benzoate preservative and stir until dissolved.
  6. Check the pH and adjust to 5.0 to 5.5 if needed with a few drops of a 10% citric acid solution.
  7. Fill into a pump or dropper bottle and label with the date.

The preservative here is our GSB Natural Preservative Powder. Supplier sheets for gluconolactone and sodium benzoate blends list 0.75% to 2.0% with best performance at pH 3 to 6, so it is used at 2.0%, the top of that range.

Recipe 2: Beta-Glucan Daily Moisturizer (100 g)

Phase Ingredient % Grams
A Distilled water 75.2 75.2
A Vegetable glycerin 3.0 3.0
A Xanthan gum 0.3 0.3
B Emulsifying Wax NF 5.0 5.0
B Cetyl alcohol 1.5 1.5
B Caprylic/capric triglyceride 6.0 6.0
B Shea butter 2.0 2.0
C Beta-glucan solution 5.0 5.0
C Gluconolactone and sodium benzoate 2.0 2.0
Total 100.0 100.0
  1. Sanitize equipment.
  2. Phase A: disperse the xanthan gum in the glycerin, add the water, and heat to 70 to 75°C.
  3. Phase B: melt the emulsifying wax, cetyl alcohol, triglyceride and shea butter together at 70 to 75°C.
  4. Pour Phase B into Phase A and blend with a stick blender in short bursts for 1 to 2 minutes.
  5. Stir by hand while the cream cools.
  6. Below 40°C, add the beta-glucan solution, then the preservative. Stir until smooth.
  7. Check the pH and adjust to 5.0 to 5.5. Fill into an airless pump or jar.

For more on how the emulsifier in this base works, see our emulsifying wax guide.

Recipe 3: Five-Minute Beta-Glucan Boost for an Aloe Base (30 g)

If you do not want to make a formula from scratch, you can add beta-glucan to a ready-to-mix carrier. Our Aloe Vera Gel Serum Base is designed for adding water-soluble actives.

Ingredient % Grams
Aloe Vera Gel Serum Base 95.0 28.5
Beta-glucan solution 5.0 1.5
Total 100.0 30.0
  1. Weigh the aloe base into a clean bottle.
  2. Add the beta-glucan solution.
  3. Cap and shake well for 30 seconds, or stir with a clean spatula.
  4. Label with the date. Use within 3 months.

Before adding anything to a finished base, check its ingredient label to confirm it contains a preservative. Because you are adding a water-based ingredient, mix small batches and use them up quickly.

Converting the Recipes to Other Batch Sizes

Every recipe is written in percentages, so scaling is simple: multiply each percentage by your batch weight and divide by 100. For a 250 g batch of the gel serum, that gives 224.25 g distilled water, 12.5 g beta-glucan solution, 7.5 g glycerin, 0.75 g xanthan gum and 5.0 g preservative. Weigh every ingredient on a scale that reads to 0.01 g. Small weighing errors matter most for the xanthan gum and the preservative.

Stability Checks Before You Use or Sell

  • 24 hours: check pH, look for separation, and note the texture.
  • 1 week: look for cloudiness, color change, or a sour smell.
  • 4 weeks: hold one sample at room temperature and one at about 40 to 45°C. Compare texture and appearance.
  • Before selling: send a sample for a preservative efficacy (challenge) test. Our guide to choosing a natural preservative system covers how to plan for it.

Troubleshooting

Problem Likely cause Fix
Tacky or sticky finish Glycerin plus beta-glucan feels heavy on some skin Reduce glycerin to 1 to 2% and add the difference as water
Lumpy gel Xanthan added straight to water Always disperse xanthan in glycerin first
Cream thins after adding beta-glucan Added too warm, or blended too long after cool-down Add below 40°C and stir by hand, not with the blender
Cloudiness or film after a week Possible contamination Discard. Review sanitizing and preservative weights

Frequently Asked Questions

What is the best usage rate for beta-glucan?

For the liquid beta-glucan solution used in these recipes, the supplier sheet lists 1% to 5%. I use 5%, the maximum. For any other beta-glucan product, use that supplier's maximum, because forms and concentrations differ.

Can I heat beta-glucan?

The supplier sheet I used does not give a heat-stability limit, so I add it below 40°C. Check your own supplier's technical sheet.

Can I combine beta-glucan with peptides or hyaluronic acid?

Yes. They are all water-soluble and sit comfortably in the same water phase. Add each one at its own supplier's recommended rate.

Does beta-glucan need a preservative?

Yes, in any formula that contains water. It is a polysaccharide in water, which supports microbial growth without protection.

Can I use beta-glucan in an oil serum?

No. Beta-glucan solution is water-based and will separate from oils. Use it in gels, serums, lotions and creams.

Sources

  • Pillai R, Redmond M, Roding J. Anti-wrinkle therapy: significant new findings in the non-invasive cosmetic treatment of skin wrinkles with beta-glucan. IFSCC Magazine. 2005;8(1):17-21; abstract in Journal of Cosmetic Science. 2005;56:211-212. Penetration test with 0.5% beta-glucan solution on human abdominal skin; clinical study of 27 participants over 8 weeks. SCC library abstract

These statements have not been evaluated by the Food and Drug Administration. These products are not intended to diagnose, treat, cure, or prevent any disease.

About the Author
Written by Kari Thomas, cosmetic formulator and founder of Skin Perfection.