A formula is only as good as the raw materials that go into it. The same peptide or botanical can arrive at full strength or half degraded, clean or contaminated, depending on who made it, how it was shipped and how you store it. This page covers the part of working with cosmetic raw ingredients that most beginner guides skip: what paperwork to ask for, how to read a certificate of analysis (COA) and a safety data sheet (SDS), how to store each type of ingredient, and how to track shelf life once a container is open.
If you want to know what the main ingredient categories are and what each one does in a formula, start with our cosmetic raw ingredients guide. This page assumes you know what you want to buy and focuses on buying it well and keeping it in good condition.

The Three Documents to Ask For
| Document | What it tells you | When you need it |
|---|---|---|
| Certificate of Analysis (COA) | Test results for the specific lot you are buying | Every lot, before you use it |
| Safety Data Sheet (SDS) | Hazards, safe handling, storage and first aid for the material | Before you open it for the first time |
| Technical data sheet or formulation guide | Recommended usage rate, pH range, temperature limits, solubility | Before you write the formula |
A reputable supplier provides all three. If a seller cannot tell you the lot number, cannot produce a COA for that lot, or has no SDS, that is a reason to buy elsewhere.
How to Read a Certificate of Analysis
A COA is lot-specific. It reports what the supplier measured on the batch in your container, compared against the specification for that material. These are the fields I check, in order:
- Product name and INCI name. Confirm they match what you ordered.
- Lot or batch number. It must match the number printed on your container. A COA for a different lot tells you nothing about yours.
- Manufacture date and expiry or retest date. This sets your shelf life clock.
- Appearance, color and odor. Compare with what you received. A peptide solution that should be clear but arrives cloudy needs a call to the supplier.
- Assay or active content. For actives, the measured percentage or purity. A GHK-Cu powder sold as 99% pure should show a purity result, not just "conforms."
- pH, density, refractive index or viscosity. Physical tests that confirm identity and consistency.
- Microbial results. Total aerobic count, yeast and mold, and absence of specific organisms. These matter most for water-based materials and botanical extracts.
- Heavy metals. Especially for minerals, clays and plant materials.
- Signature and date of release. Shows someone in quality control approved the lot.
Red flags on a COA
- Results that only say "conforms" with no numbers for the key tests
- No lot number, or a lot number that does not match your container
- An expiry date that has already passed or is very close
- No microbial testing on a water-based or plant-based material
How to Read a Safety Data Sheet
The SDS format is set by the OSHA Hazard Communication Standard, which aligns with the Globally Harmonized System (GHS). Every SDS has 16 sections in the same order:
| Section | Title | Why a formulator reads it |
|---|---|---|
| 1 | Identification | Confirms product, supplier and emergency contact |
| 2 | Hazard(s) identification | Pictograms and warnings for the concentrated material |
| 3 | Composition / information on ingredients | What is in it, including carriers and preservatives |
| 4 | First-aid measures | What to do after skin or eye contact |
| 5 | Fire-fighting measures | Important for oils, alcohols and essential oils |
| 6 | Accidental release measures | How to clean up a spill |
| 7 | Handling and storage | Storage temperature, light and moisture conditions |
| 8 | Exposure controls / personal protection | Gloves, eye protection, masks for powders |
| 9 | Physical and chemical properties | pH, solubility, flash point, appearance |
| 10 | Stability and reactivity | What it should not be mixed with or exposed to |
| 11 | Toxicological information | Irritation and sensitization data for the raw material |
| 12 to 15 | Ecological, disposal, transport, regulatory | Required for GHS consistency; OSHA does not enforce these sections |
| 16 | Other information | Revision date and notes |
For home formulators, sections 7, 9 and 10 are the most useful day to day. Remember that an SDS describes the concentrated raw material, not your finished product at its usage rate. Skin Perfection publishes safety data sheets for many of our boosters and bases on our MSDS page.
What Professional Manufacturers Do With Raw Materials
The FDA's Good Manufacturing Practice guidelines and inspection checklist for cosmetics describe how manufacturers are expected to handle raw materials. The points translate directly to a home workspace:
- Raw materials are stored and handled so they cannot be mixed up, and protected from heat, cold, sunlight and moisture.
- Bagged or boxed materials are stored off the floor, and containers are kept closed.
- Containers are labeled with identity, lot identification and control status.
- Materials are sampled and tested, or examined, to confirm they are free of contamination, and materials that fail are identified and kept out of use.
- Reserve samples of approved raw materials are kept under protective conditions.
- Water used as an ingredient is tested regularly against chemical and microbiological specifications.
- Records track which lots went into which batch.
You do not need a lab to follow the spirit of this. You need labels, a log and a refrigerator.
Storage by Ingredient Type
| Ingredient type | Store at | Protect from | Notes |
|---|---|---|---|
| Peptide solutions and serum boosters | Refrigerator, 2 to 8°C (36 to 46°F) | Light, heat | Blue or amber glass, cap tight |
| Peptide powders (for example GHK-Cu) | Cool, dry place | Moisture, humidity | Tight lid, sealed bag around the jar |
| Hyaluronic acid powder | Cool, dry place | Moisture | Shelf-stable as a dry powder until mixed |
| Carrier oils | Cool, dark place; refrigerate delicate oils | Light, heat, air | Smell before use; rancid oil smells like crayons or old nuts |
| Essential oils | Cool, dark place | Light, heat, air | Dark glass, minimal headspace |
| Botanical extracts and hydrosols | Refrigerator | Heat, contamination | Check COA for preservative |
| Emulsifiers, waxes, butters | Room temperature, below 25°C (77°F) | Heat | Butters can turn grainy if they melt and re-solidify slowly |
| Preservatives | Room temperature, sealed | Heat, light | Follow SDS section 7 exactly |
The storage conditions on a supplier's own document always override a general table. For example, DSM's formulation guidelines for Syn-Coll specify storage at 2 to 8°C in the unopened original container, protected from light, for at least 36 months from manufacture.
Shelf Life: Unopened, Opened and Mixed
The FDA states that there are no U.S. laws or regulations requiring cosmetics to have specific shelf lives or expiration dates, and that determining shelf life is part of the manufacturer's responsibility for product safety. The FDA lists the factors that shorten shelf life: microorganisms introduced by fingers and applicators, preservatives breaking down over time, emulsions separating, moisture, drying out, and temperature changes, sunlight and air.
For raw materials, track three dates:
- Unopened expiry or retest date, from the COA or label.
- Period after opening. Many suppliers print an open-jar symbol with a number of months. Our Matrixyl 3000 Serum Booster, for example, carries a 12-month period after opening and should be refrigerated on arrival.
- Finished product date. Once you blend a raw material into a formula, the formula's own preservation and stability set the clock, not the raw material's date.
A simple labeling system
Every container gets a label with: ingredient name, lot number, date received, date opened, and use-by date. Every batch you make gets a label with: formula name, date made, and the lot numbers of each active. If something goes wrong, you can trace it.
Buying Checklist
- The seller names the INCI and the original manufacturer of the material.
- A lot-specific COA is available before or with shipment.
- An SDS is available.
- Recommended usage rate and pH range are published.
- The container arrives sealed, labeled with a lot number, and at the right temperature. Peptide solutions shipped in summer heat for a week are worth questioning.
- The quantity is one you will use before the period after opening runs out.
Our GHK-Cu Copper Peptide Powder, 99% Pure is a good example of matching quantity to use: 1 gram makes 100 ml of finished formula at its 1% usage rate, so a home formulator can use it well within its storage life.
Handling in Your Workspace
- Sanitize first. Clean surfaces and tools, then spray with 70% isopropyl alcohol and let it evaporate.
- Never return unused material to the original container. Pour or pipette out what you need.
- Weigh powders on a scale that reads to 0.01 g. Powders are not measured in drops.
- Wear gloves and eye protection when handling concentrated acids, preservatives and powders, as directed in SDS section 8.
- Add heat-sensitive actives below 40°C (104°F). DSM recommends this for Syn-Coll, and I follow the same rule for every peptide booster.
- Use a preservative in every water-based formula. Our guide to natural skin care preservatives covers the options.
Frequently Asked Questions
What is the difference between a COA and an SDS?
A COA reports test results for one specific lot. An SDS describes the hazards, handling and storage of the material in general and follows a 16-section format set by OSHA's Hazard Communication Standard. You want both.
Do cosmetic raw ingredients expire?
Yes. Check the expiry or retest date on the COA or label, and the period after opening if one is given. The FDA notes that preservatives break down over time and that heat, light, air and moisture shorten shelf life.
Should I refrigerate my cosmetic ingredients?
Refrigerate peptide solutions, serum boosters, botanical extracts and hydrosols unless the supplier says otherwise. Keep powders cool and dry, and keep butters and emulsifiers at room temperature away from heat.
Is an MSDS the same as an SDS?
Yes. MSDS (Material Safety Data Sheet) is the older name. The current OSHA format is the 16-section SDS.
Are cosmetics required to have expiration dates in the U.S.?
No. The FDA states there are no U.S. laws or regulations requiring specific shelf lives or expiration dates for cosmetics. Manufacturers are responsible for determining shelf life as part of product safety.
These statements have not been evaluated by the Food and Drug Administration. These products are not intended to diagnose, treat, cure, or prevent any disease.
About the Author
Written by Kari Thomas, cosmetic formulator and founder of Skin Perfection.
Sources
- Occupational Safety and Health Administration. Hazard Communication Standard: Safety Data Sheets. OSHA Brief DSG BR-3514, 2012.
- U.S. Food and Drug Administration. Good Manufacturing Practice (GMP) Guidelines/Inspection Checklist for Cosmetics.
- U.S. Food and Drug Administration. Shelf Life and Expiration Dating of Cosmetics.
- DSM. SYN-COLL Formulation Guidelines. Supplier storage and processing conditions.